SHENZHEN OCT-TECH Home | About Us | Products | News | Download | Support | Contact Us

Sensor Signal Simulation Multi-meter

Display:        3-3/4 digits LCD with 25mm high
numerical displays.
Auto Functions:    Auto-zero, Auto-polarity, Auto-ranging.
Auto Power Off:           The meter will enter into ※Power Off§ mode 30 minutes after no activity detected. When button is pushed or selector switch is turned, Power turns ON again.
      
Low Battery Indication: " ".
 
Over range Indication: "OL".
 
Power Supply:       Single 9V battery (NEDA 1604or IEC 6F22)
 
Reading Rate Time:       3 reading per sec (approx.).
 
Max. Common Mode Voltage: 500VDC or AC peak.
 
 
 
 
Safety Standards:   The meter is up to the standards of IEC1010 Double Insulation, Pollution degree 2 over voltage Category ｊ.
Operating Environment: 0 ~ 50⊥ (32~122沈) at ≒70% relative humidity.
Storage Environment:  -20~60⊥ (-4~140沈) at ≒80% relative humidity.
Temperature Coefficient: 0.1℅(specified accuracy)/(≒18⊥ or≡28⊥)
Accessories:   One pair test leads, single 9V battery (NEDA 1604or IEC 6F22), operating instructions.
Fuse:      0.5A/250V, 5℅20mm fast acting 10A/250V, 5℅20mm or 5℅25mm, fast acting.
Dimension:     155mm℅97mm℅50mm
Weight:   Approx. 320g (including battery and holster).
 
ELECTRICAL SPECIFICATIONS:
*Accuracy is given as ㊣ ([% of reading] + [number of decimal digits]) at 18~28∼C (65~83∼F), with relative humidity up to 70%.
 
DUTY CYCLE %
Ranges: 0.0~90.0%
Resolution:      0.1%
Pulse width:    > 100us, <100ms
Accuracy:       ㊣ (2.5%rdg+10dgt)
Overload protection: 250VDC or RMS AC
 
 
DC VOLTAGE (Auto Ranging)
Ranges: 400mV
Accuracy:      ㊣ (0.8%rdg+10dgt)
Ranges: 4V, 40V, 400V, 1000V
Accuracy:      ㊣ (0.5%rdg+5dgt)
Resolution:     100uV
Input impedance:    >10M次
Overload protection: 1000VDC or 750VAC RMS.
 
AC VOLTAGE (Auto Ranging)
Ranges: 400mV, 4V, 40V, 400V, 750V, (400mV only in manual)
Resolution:     100uV
Accuracy:      400mV, 750V ㊣ (1.8%rdg+10dgt) at 50~100Hz
4V, 40V, 400V, ㊣ (1.5%rdg+10dgt) at 50~ 400Hz
Input impedance:    >10M次
Overload protection: 1000VDC or 750VAC RMS.
 
DC CURRENT (Auto Ranging)
Ranges: 400uA, 4000uA, 40mA, 400mA, 10A.
Resolution:      0.1uA
Accuracy:       400uA, 4000uA ㊣ (1.2%rdg+5dgt)
              40mA, 400mA ㊣ (1.5%rdg+5dgt)
 10A ㊣ (2.0%rdg+10dgt)
Input protection:     0.5A/250V fuse on 400mA range
10A/250V high energy fuses on 10A range
 
AC CURRENT (Auto Ranging)
Ranges:         400uA, 4000uA, 40mA, 400mA, 10A.
Resolution:            0.1uA
Frequency response: 50Hz to 400Hz
Accuracy:             400uA, 4000uA ㊣(1.8%rdg+5dgt)
40mA, 400mA ㊣(1.8%rdg+10dgt)
  10A ㊣ (2.5%rdg+10dgt)
Input protection:    0.5A/250V fuse on 400mA range
10A/250V high energy fuses on 10A range
 
RESISTANCE 次 (Auto Ranging)
Ranges:                 400次, 4K次, 40K次, 400K次, 4M次, 40M次
Accuracy:              ㊣ (1.2%rdg+10dgts) on 400次 range
㊣(1.0%rdg+5dgts) on 4k次 to 4M次 ranges
                             ㊣(2.5%rdg+15dgts) on 40M次 ranges
Open circuit voltage: 0.4VDC
Overload protections: 250VDC or RMS AC.
 
 
 
FERQUENCY (Auto Ranging)
Ranges:         100Hz, 1 KHz, 100 KHz, 200 KHz
Resolution:            0.01Hz
Accuracy:             ㊣ (0.1%rdg+5dgts)
Sensitivity:             1V
Overload protection: 250VDC or RMS AC
 
CAPACITANCE (Auto Ranging)
Ranges:                 40nF, 400nF, 4uF, 40uF, 100uF.
Resolution:            10pF
Accuracy:              ㊣ (2.5%rdg+10dgts) on 40nF range
㊣(1.5%rdg+10dgts) on 400nF to 4uF ranges
㊣(2.5%rdg+15dgts) on 40uF to100uF ranges
Overload protection: 250V DC or RMS AC
 
DIODE TEST
Test current:          0.6mA typical
Resolution:             1mV
Accuracy:              ㊣ (2.5%rdg+2gdts)
Open circuit voltage: 3.0Vdc typical
Overload protection: 250VDC or RMS AC.
 
AUDIBLE CONTINUITY
Open circuit voltage:
0.4Vdc≒60次:         Buzzer sounds
Overload protections: 250VDC or RMS AC.
 
SIGNAL OUTPUT:
DC voltage:            0~1V﹜0~5V﹜0~12V
Duty Cycle:            10~90%
FREQUENCY:        20Hz~-3 KHz @ 0~5V and 0~12V
RESISTANCE:       0~5K次, 0~200K次
 
 
    Back