This  digiprog 3 odometer programmer V4.94 is latest version of Digiprog3, add more car models on the basic of V4.88. It is a cost-effective mileage correction tool, supports multi-language and full range or vehicle.

1. Newest Version: V4.94
2. Power-On Password: 1
3. Supported Languages: Deutsch/ English/ Espanol/ French/ Portuguese/ Italiano/ Turkish/ Nederlands.
 
V4.94 Add Model List:
 
Audi
-A3 new version
Ford
-F150 24C16
-Falcon 24c02
Mercedes
-W176 new version
-W204 new version Diag
-w212 new version Diag
Opel
-Insignia new version
-Astra new version

digiprog 3 odometer programmer V4.93 :
 
For Audi
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford
Kuga Transit
For VW
Amarok Polo Johnson
 
digiprog 3 odometer programmer V4.94 Features:
 
1. Service interval adjustments and settings
 
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
 
Some Important Tips for Using Digiprog 3:
 
1. Always connect the Eeprom to the ST01 or ST04

before you connect to the DigiProg this will avoid Electro

static feedback (ESD).
2. Never solder the connections whilst the lead is

connected to the programmer, this will damage the

DigiProg.
3. Always keep your DigiProg in its case when not in

Use & keep it in a dry environment at night (don’t leave

it in the trunk of your car) If you are using solvents to

remove lacquers’ from Eeprom’s ensure that they are

cleaned 4. completely as the solvent can damage the

clips.
 
Digiprog 3 Menu:
 
1. EEPROM Menu
 
The first option on the main menu is the Eeprom menu.

Reading, writing and saving Eeprom information is all

done using this menu. A more detailed guide to using

this menu follows later on in the introduction.
 
2. CAR/TRUCK Menu
 
This is the menu you will use for correcting and

reprogramming vehicles. Manufacturers are set out in

alphabetical order and models of vehicles are set out in

a simple sub-menu format.
 
3. Motorcycle Menu
 
This menu is the same as the CAR/TRUCK menu but is

used for reprogramming motorcycles.
 
4. Special Functions Menu
 
The special functions menu is for use only by official

DigiProg dealers.
 
5. Setup Menu
 
This menu is where settings on your DigiProg can be

changed. Language, password, brightness, volume,

and the time/date can all be set and changed in this

menu. You can also change whether your machine is

working in kilometres or miles.
 
Using the EEPROM Menu:
 
On some of the vehicles you will come across, an eight

pin Eeprom chip will be used to store the vehicle data.

These chips hold vital information from the vehicle such

as ignition and immobiliser codes. Loss of this

information could result in anything from minor faults, to

major faults involving the vehicle not starting and having

to be taken to the main dealer. This is why it is very

important to read and save the original information from

the Eeprom before programming, this way if any errors

do occur you can always return to the point you started.
 
The process of reading and saving this information is

very simple. The Eeprom chip itself will have a mask

number printed across the top of it, for example a widely

used chip is a 93C46. You can connect the chip to your

DigiProg by using adaptor ST01 or ST04. Most chips are

surface mount eeproms which will use ST01, but the

larger DIL chips will use ST04.

Package List:
 
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters