SHENZHEN OCT-TECH Home | About Us | Products | News | Download | Support | Contact Us

BMW AD 4 in 1

 

BMW AD 4 in 1  Interface support both the K line and the CAN BUS system. It is an 4-in-1 interface, which can work for BMW INPA K+CAN  , BMW Scanner 1.4.0 , BMW Dash V2.0, and HiTag2 V3.1 key programmer .

 

Bmw inpa K+CAN


Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
 
 
Features
 
- read and delete errors
- adaptations
- driver programming
- applu coding
- and others...
 
Supports protocols:
 
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface).
 
D-CAN for:
 
- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)
 
PT-CAN, K-CAN - fully switchable speed of migistral CAN - ou can diagnose driver withtou any car
 
Protocol "BMW OBD interface" for older cars:
 
- from 1995 to 1998 (don't need K-line).
- from 1998 to 03/2008 (all models)

 
 

BMW Scanner 1.4.0

Short functions list:
   Determination of chassis, model, engine, gearbox and complete set
   Searching of all units and reading:
    - identification data
    - odometer value
    - VIN and ADFG
    - programming info (UIF)
    - errors (DTC)
   Reading and saving in files:
    - program memory
    - EEPROM
    - coding data
    - amount of DTCs and DTCs shadow-memory
    - live data
    - programming info (User Info Fields)
   Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding
   ... and other functions in various units

   "Unlocked" functions to show possibilities of full version:
   DTCs description in DME MS43.0, EWS3, SRS MRS4
   Clearing DTCs in same units
   EWS-DME synchronization code in DME MS43.0
   Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4
   Status of all keys in EWS3
   EWS3 coding data interpretation
   Equipment correction in SRS MRS4

Some screenshots of BMW Scanner V1.4.0

BMW DASH V2.0

 
BMW DASH E6x V2.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis.
for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3')
Features
Connecting with all electronic control modules in the vehicle.
For all electronic control units reading identification data, sw/hw versions, user information fields.
For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
Possibility to read/program memory of electronic control units (including CAS modules).
Synchronization DME/DDE and CAS.
 
HiTag2 v3.1 programmer
 
HiTag2 v3.1 programmer is universal keys programmer, with additional options of keys programming from dump and PIN extraction. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically!
Features of HiTag2 programmer:
1. Latest versions of HiTag2 transponders are fully supported!
2. Widest range of supported cars, using HiTag2 protocol!
3. Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
4. Correct BMW keys programming - RADIO REMOTE is working!
5. BMW Explorer keyprog support added
Available languages - English
Key generation from dump is available for the following cars:
1. BMW (CAS1/2/3/3+)
2. AUDI (KESSY)
3. VW (KESSY)
4. PORSCHE (KESSY)
5. BENTLEY (KESSY)
6. CHRYSLER (SKIM)
7. LAND ROVER (EWS§ç)
8. NISSAN (NATS)
9. OPEL (CIM)
10. RENAULT (UCH)
11. SAAB (CIM)
    Back